Search Catalog
        
 All Categories    Bevel Gear Boxes
All Categories > Mechanical Power Transmission > Bevel Gear Boxes > Item # 27  

Item # 27, 32 Horsepower (hp) Maximum Input Power Bevel Gear Box

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

Any discussion of Bevel Gear Boxes must first clarify the definition of Beveled Gears.

A bevel gear is made in the shape of a cone. Deployed in pairs, they are used to connect intersecting shafts. Normally they are mounted on shafts that are at 90º to each other (hence the term "right angle" bevel gears). However, they are not restricted to 90º mounting.




Specifications  · Shaft Diameters and Lengths  · Case Dimensions  · Additional Information  · Note

Specifications

Brands
Von Ruden®

Pinion Shaft Diameter
1.0 in

Maximum Input Speed
3000 rpm

Maximum Input Power
32 hp

Available Gear Reduction Ratios
1.5:1
1:1
2:1
3:1

Available Speed Up Ratios
1:1.5
1:2
1:3

Available Gear Types
Spiral
Straight Cut

Approximate Weight
12 lb

Oil Capacity
6 oz

Housing Material
Rugged Cast Iron

Industrial Applications
Antennas
Bonding Equipment
Bottle Packaging Equipment
Bottling Equipment
Business Form Presses
Cardboard Box Equipment
Collating Machinery
Conveyor Drives
Conveyors
Feed Screw Drives
Film Processors
Food Processing
Gate Valve Actuators
Lifts/Hoists/Jacks
Material Handling
Metering Augers
Mixing Equipment
Newspaper Conveyors
Packaging
Paper Conveying
Plastic Extruders
Printing Presses
Robotics
Rubber Processing
Sewage Agitators
Sewage Augers
Sewage Conveyors
Solar Panels
Web Finishing
Wrapping Machines

Mobile and Other Applications
Bulkhead Door Openers
Car Wash Curtains
Commercial Mowers
Cranes
Dual Steering
Fan/Blower Drives
Mining Equipment
Misc. Conveyors
Pump Drives
Residential Mowers
Sand Spreaders
Scissors Lifts
Snow Blowers
Street Sweepers

Agricultural Applications
Augers/Elevators
Fans
Feed Mills/Blenders
Fertilizer Spreaders
Food Handling
Forage Harvesters/Blowers
Grain Bin Augers
Grain Dryers
Grain Wagons
Grinders/Mixers
Harvesters
Hay Balers
Manure Spreaders
Power Rakes
Rock Pickers
Rotary Mowers/Cutters
Tillers
Tub Grinders

Note for Applications
Because we've been producing bevel gear boxes for over 50 years, Von Ruden® brings substantial problem-solving experience to the table. Whether your goal is to blend, blow or bottle - you need to crank, cut or convey - or the task is to press, propel or raise, we welcome the opportunity to put our experience with all these industries to work for you.


Shaft Diameters and Lengths

Pinion Shaft Diameter A
0.725 in

Shaft Length B
1.500 in

Shaft Length C
6.312 in

Cross Shaft Diameter D
0.750 in

Shaft Length E
1.500 in

Note for Shaft Length E
Dimension E is to end caps.

Shaft Length F
1.500 in

Note for Shaft Length F
Dimension F is to end caps.

Shaft Length G
4.593 in

Shaft Length H
9.187 in


Case Dimensions

Case Dimension J
3.218 in

Case Dimension K
6.437 in

Case Dimension L
1.250 in

Case Dimension M
2.500 in

Case Dimension N
2.125 in

Case Dimension P
4.000 in


Additional Information
Primary Purposes:
The primary purposes of bevel gear boxes are illustrated here. Two or more purposes are frequently accomplished simultaneously. For example: To transmit power at 90º and decrease speed/increase torque.
  • Transmitting Power At 90º
  • Splitting Power
  • Decreasing Speed & Increasing Torque
  • Increasing Speed & Decreasing Torque
  • Increasing Speed & Decreasing Torque
Tailored to the Needs of a Design Engineer.

Selection:
  • Models up to 200 hp.
  • Choices of gear types and ratios.
  • Speed reducing and increasing models.
  • Direction of rotation options.
  • Hydraulic motor input flange option.
  • Configuration options.
Extended Working Life
  • Press-fit gears and bearings for superior rigidity and maximum performance.
  • Properly shimmed gears and bearings for consistent backlash.
  • No paper or plastic shims. Metal shims used throughout.
  • Tapered roller (not ball) bearings throughout.
  • Aluminum end caps and pinion housings on most models for improved heat dissipation.
  • High strength steel alloys - gears cut from 8620 steel, the carburized and hardened.
  • Improved shaft seals - spring loaded double lip design. One lip seals in the oil, the other seals out dirt.
    All shafts are specially ground/burnished at the seal area for extended life.
Maintenance and Repair
End caps and piston housings remove easily. (No need for a special access cover.)
Only locking nuts or locking tab washers used internally. Threads are not staked.

Organized to Earn Your Confidence:
Every member of the Von Ruden® team works for you to provide a quality product, delivered on-time with the best possible service both before and after the sale. This company-wide commitment assures you:
  • Very competitive prices.
  • Improved delivery via flexible production schedules.
  • Complete technical assistance from our global network of local representatives and our own engineering department.
  • Direct support for your own customers when you request it.
  • "Specials" will always be considered and usually built.
Over a Half-Century of Expertise
For over 50 years, Von Ruden® manufacturing has built its reputation around quality products, designed and built in modern, well-tooled facilities. Though our products and processes have certainly evolved over the decades our 21st Century commitment to superior products, competitive prices, and unexcelled service remains unchanged.

Specials
Yes, Von Ruden® will manufacture "specials" to satisfy unique customer requirements. Different shaft lengths, gear ratios and housing configurations can all be provided. These are examples of the hundreds of atypical configurations we've provided in the past.
Indeed, we might already have produced a custom design very similar to what you need. Please contact your factory representative for data on existing Von Ruden® specials and a proposal for your application.


Note
All information is subject to change without notice. Always confirm with us that you are working with the most current data.


 MORE IMAGES 

·  Nomenclature of a Typical Bevel Gear Box

·  Typical Set of Bevel Gears Meshed at 90 Degree

·  Model 2726 Gearhead and Gearbox - 2

·  Model 27 Bevel Gear Box - 3

·  Model 27 Bevel Gear Box - 4


 DOWNLOADS 

Brochure for Bevel Gear Boxes
(PDF, 1505KB)