Search Catalog
        
 All Categories    SAE C-C Overhung Load Adapters with Heavy-Duty Tapered Bearing
All Categories > Hydraulic Motors and Systems > Overhung Load Adapters > SAE C-C Overhung Load Adapters with Heavy-Duty Tapered Bearing > Item # E6F6G34  

Item # E6F6G34, SAE C-C 1.75 Inch (in) Output Shaft Diameter and 1.50 Inch (in) Input Shaft Diameter Grease Packed Overhung Load Adapter

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

Use with hydraulic motor and pump applications with shaft diameters up to 1.75" in diameter and a 5.0" pilot.




Specifications  · Additional Information  · Note

Specifications

Brands
Von Ruden®

Type
Overhung Load

Output Flange
SAE "C-C"

Mounting Bolt Diameter
6 Holes thru. 4 in. at 9/16 in. on 6-3/8 in. [162.0 mm] BC and 2 at 11/16 in. on 7-1/8 in. [181.0 mm] BC

Output Shaft Diameter
1.75 in
44.45 mm

Output Shaft Keyway Length
7/32 in

Output Shaft Keyway Width
7/16 in

Input Flange
SAE "C-C"

Input Shaft Diameter
1.50 in
38.1 mm

Input Shaft Keyway Length
3/16 in

Input Shaft Keyway Width
3/8 in

Bearing Type
Heavy-Duty Tapered Bearing

Special Options
Grease Packed

Material
Cast Iron

Tensile Strength
35,000 psi

Pilot Size
5.0 in

Shaft Diameter
Up to 1.75 in

Approximate Weight
55 lb
24.95 kg


Additional Information
Bodies are made of quality 35,000 tensile strength cast iron material for dependability.

All models are drilled with correct holes for mounting (SAE or Industry Standard) using 2 or 4 bolt flanges. Bases are machined, drilled and threaded for foot mounting on every standard model. Features to make installation and designing easier for you.

Quality high speed ball bearings are used on all smaller units.

Heavy-duty tapered roller bearings will give performance, durability for smooth operation and long life on larger units giving the assurance of solid performance for you or your customers. All standard shafts use 4140 steel for trouble free operation. Input shafts are in sizes from the miniseries 0.626 inches [15.90 mm] to the SAE C-C 1.750 inches [44.45 mm].

Output shafts are in sizes from the Mini-Series 0.750 inches [19.05 mm] to the SAE C-C 1.750 inches [44.45 mm].

Spline shafts for input and output are available in several configurations depending on model size.

Hollow bore shafts are available on several models.

Instructions for mounting included.

Gaskets/mounting seals provided for input.


Note
Users must shield all moving parts and fill each with a proper lubricant.


 MORE IMAGES 

·  SAE C-C Overhung Load Adapters with Heavy-Duty Tapered Bearing - 3

·  SAE C-C Overhung Load Adapters with Heavy-Duty Tapered Bearing - 4

·  SAE C-C Overhung Load Adapters with Heavy-Duty Tapered Bearing - 5


 DOWNLOADS 

Brochure for Overhung Load Adapters
(PDF, 5015KB)