Von Ruden Manufacturing, Inc.
1008 First Street NE PO Box 699
Buffalo, Minnesota 55313
Phone: 763.682.3122 • Fax: 763.682.3954
Email: sales@vonruden.com
|
|
|
|
|
Item # E6F6J35, SAE C-C 1.75 Inch (in) Output Shaft Diameter and 17 Tooths Oil Flush (High Speeds) Overhung Load Adapter
|
|
|
|
|
|
Use with hydraulic motor and pump applications with shaft diameters up to 1.75" in diameter and a 5.0" pilot.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bodies are made of quality 35,000 tensile strength cast iron material for dependability.
All models are drilled with correct holes for mounting (SAE or Industry Standard) using 2 or 4 bolt flanges. Bases are machined, drilled and threaded for foot mounting on every standard model. Features to make installation and designing easier for you.
Quality high speed ball bearings are used on all smaller units.
Heavy-duty tapered roller bearings will give performance, durability for smooth operation and long life on larger units giving the assurance of solid performance for you or your customers. All standard shafts use 4140 steel for trouble free operation. Input shafts are in sizes from the miniseries 0.626 inches [15.90 mm] to the SAE C-C 1.750 inches [44.45 mm].
Output shafts are in sizes from the Mini-Series 0.750 inches [19.05 mm] to the SAE C-C 1.750 inches [44.45 mm].
Spline shafts for input and output are available in several configurations depending on model size.
Hollow bore shafts are available on several models.
Instructions for mounting included.
Gaskets/mounting seals provided for input.
|
|
|
|
Users must shield all moving parts and fill each with a proper lubricant.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
