Von Ruden Manufacturing, Inc.
1008 First Street NE PO Box 699
Buffalo, Minnesota 55313
Phone: 763.682.3122 • Fax: 763.682.3954
Email: sales@vonruden.com
All Categories > Hydraulic Motors and Systems > Overhung Load Adapters > SAE A 2 Bolt Flange Overhung Load Adapters with Standard Duty Ball Bearing > Item # A2G1X13  


Item # A2G1X13, SAE A 0.75 Inch (in) Output Shaft Diameter and 2 Bolt Flange Fluorocarbon Seals Overhung Load Adapter

Use with hydraulic motor and pump applications with shaft diameters up to 1" in diameter and 3.25" pilot.





Specifications  · Additional Information  · Note

Specifications

Brands
Von Ruden®

Type
Overhung Load

Output Flange
SAE "A"

Number of Mounting Bolt Holes
2

Mounting Bolt Diameter
17/32 in. thru on 4-3/16 in. [106,363 mm ] BC

Output Shaft Diameter
0.75 in
19.05 mm

Output Shaft Keyway Length
3/32 in

Output Shaft Keyway Width
3/16 in

Input Flange1
SAE "A"

Input Shaft
Hollow thru Shaft

Bearing Type
Standard Duty Ball Bearing

Special Options
Fluorocarbon Seals

Material
Cast Iron

Tensile Strength
35,000 psi

Pilot Size
3.25 in

Shaft Diameter
Up to 1 in

Approximate Weight
10 lb
4.53 kg
1 Order spacer #11351 when 1/8" deep pilot is required.


Additional Information
Bodies are made of quality 35,000 tensile strength cast iron material for dependability.

All models are drilled with correct holes for mounting (SAE or Industry Standard) using 2 or 4 bolt flanges. Bases are machined, drilled and threaded for foot mounting on every standard model. Features to make installation and designing easier for you.

Quality high speed ball bearings are used on all smaller units.

Heavy-duty tapered roller bearings will give performance, durability for smooth operation and long life on larger units giving the assurance of solid performance for you or your customers. All standard shafts use 4140 steel for trouble free operation. Input shafts are in sizes from the miniseries 0.626 inches [15.90 mm] to the SAE C-C 1.750 inches [44.45 mm].

Output shafts are in sizes from the Mini-Series 0.750 inches [19.05 mm] to the SAE C-C 1.750 inches [44.45 mm].

Spline shafts for input and output are available in several configurations depending on model size.

Hollow bore shafts are available on several models.

Instructions for mounting included.

Gaskets/mounting seals provided for input.


Note
Users must shield all moving parts and fill each with a proper lubricant.